Smart LED High Bay Light with Motion Sensor, 200W 28000LM(Eqv. 800W MH/HPS) High Bay LED Light

Save 20%
$199.99
$159.99
Liquid error (product-form line 97): Could not find asset snippets/spreadr.liquid

Smart LED High Bay Light with Motion Sensor, 200W 28000LM(Eqv. 800W MH/HPS) High Bay LED Light, ETL, Energy Saving Motion Activated Bay Lighting for Warehouse/Workshop (Remote Purchase Separately)

Product Specification

  • Wattage:200 Watts
  • Input Voltage: AC100V 110V 120V 60Hz.
  • Color Temperature: 5000K
  • Luminous Flux: 28000Lm( Eqv.800W MH/HPS)
  • Material: Die-cast aluminum+ABS Pc
  • Beam Angle: 120°
  • Plug included: 1.5M cable with 3-Pin USA Plug

Features:

  • 【Motion Activated & Always On 】This led high bay light is designed with intelligent and energy-saving Microwave induction. The sensing range can be reached 12-15m and sensing angle is 360°. Turn off/on 3 times can change to constant light, always on.
  • 【Remote Available 】Motion Activated high bay light can be controlled by reomto controller, Detection Area/ Hold time / Sensitivety can be adjustable by the remote, remote not included, search: LHB-IR-1 to order separately.
  • 【Super Bright & 80% Energy Saving】200W LED bay light use SMD3030 with total 28000lm super high brightness, energy saving up to 80% on your electricity bill.
  • 【 Fast & Safety Installation】200W UFO led high bay light include safety rope for hanging mount, with 1.5M cable and 3-pin plug, easy for install and use. No more tools needed. ETL Listed, safety installtion.
  • 【5 Year Warranty&Long Service Life】 5 Year Warranty & 24 hour full time after-sales service . It is stable and durable for maximum performance, over 50,000 hours lifespan. 100% environmentally-friendly, 100% safe and easy to install. Contact us if any issue.

 

Microwave Sensor

Factory Default:

  • Detection area: 39FT~ 52FT.
  • Hold time: 1minute. When the movement leaves the induction area, the light will be turned off after 1minute.
  • Daylight sensor: 150Lux. The motion sensor will be activated when the outside is less than 150Lux.

     

    Energy Saving & Always On Mode

    Motion Activated Function ( Factory Setting)

    After installation, when you turn on the light first time, the light will light up for 5-10 seconds and then turn off automatic.

    When the outside is less than 150Lux (about 6:00PM), a movement enter into the induction range and keep moving, the light will light up automatic and stays on.

    When the movement leaves the induction range, the light will be turned off after 1 minute.

    Change To Constant light ( Stays On Always)

    After installation, when you turn on the light first time, the light will light up for 5-10 seconds and then turn off automatic.

    Quickly turn on/off three times within 2 second until the light flashes, and then the light will stays on always.

    Note: This operation has no memory function and needs to be reperformed each time.

    You recently viewed

    Clear recently viewed