About this item

• 【Super Bright＆80% Energy Saving】300W LED high bay shop light are use high brightness SMD3030 LED with total 45000lm, Eqv.to 1200W HIP fixture, energy saving up to 80% on your electricity bill. With high CRI>85. 5000K daylight provides clear and bright lighting effect.
• 【Light Decay <5%】 100% aluminum housing with fin design, which is perfect for heat dissaption in order to extand the ufo led high bay light lifetime up to and ensure high performance for more than 50,000-hour of continuous use.
• 【 ETL & Safety Installation】Lightdot ETL Listed UFO High Bay LED Light include US hook for easy hanging mount, comes with cable and 3-pin plug direct to 100-277V AC power sourcing, as well as provided a safety wire for safety use, no more tools needed. Recommend installation height at 30~50ft.
• 【2024 Upgrade Lens & More Durable】Commercial high bay LED light with 2024 upgrade lens narrow down the space in middle, making the lighting output more uniform and no yellow spot, help focus light without any light loss as well. Perfect bay lighting for warehouse, workshops, exhibition hall, logistics center etc.
• 【5 Years Quality Support】 24 hour full time after-sales service. The led high bay light stable and durable for maximum performance, over 50,000 hours lifespan. 100% environmentally-friendly, 100% safe and easy to install. Contact us if any issue.

Product Description

 

1. 
2. 
3. 
4. 
5. 

 

1 Upgraded Smart2 Super Bright3 Commercial Grade4 Long Lifespan5 Easy Installation

Specification of 250W LED High Bay Light with Motion Sensor

Wattage	250W
Luminous Flux	37500LM
Input Voltage	AC100V-277V 60Hz.
Color Temperature	5000K Daylight
Installation Height	30~40FT

Equivalents	1000W HPS/HM
Beam Angle	120°
Motion Sensos	Yes
Remote Control Included	Yes
Material	Die-cast aluminum + ABS Lens

 

1. 
2. 
3. 
4. 

 

 

1 Motion Sensor Mode 2 Always On Mode 3 Factory Default set 4 Energy Saving

Easy To Build Your Smart Lighting System

 

Sensor Mode ( Factory Setting-Motion Activated )

When the ambient brightness is less than 150Lux (about 6:00PM), a movement enter into the induction range and keep moving, the light will light up automatic and stays on. When the movement leaves the induction range, the light will be turned off automatic after 1 minute.

Normal Mode ( Stays On Always)

After installation, if you prefer the light to be a normal light, press "ON/OFF" of the remote controller to change to always on mode, the sensor is invalid, turn on and off by your wall switch.

From the brand